RopeWizer - El Empalme Fácil
RopeWizer<sup>TM</sup> - The Easy Splice
RopeWizer<sup>TM</sup> - The Easy Splice
RopeWizer<sup>TM</sup> - The Easy Splice
RopeWizer<sup>TM</sup> - The Easy Splice
RopeWizer<sup>TM</sup> - The Easy Splice
RopeWizer<sup>TM</sup> - The Easy Splice
RopeWizer<sup>TM</sup> - The Easy Splice
RopeWizer<sup>TM</sup> - The Easy Splice
RopeWizer - El Empalme Fácil
RopeWizer<sup>TM</sup> - The Easy Splice
RopeWizer<sup>TM</sup> - The Easy Splice
RopeWizer<sup>TM</sup> - The Easy Splice
RopeWizer<sup>TM</sup> - The Easy Splice
RopeWizer<sup>TM</sup> - The Easy Splice
RopeWizer<sup>TM</sup> - The Easy Splice
RopeWizer<sup>TM</sup> - The Easy Splice
RopeWizer<sup>TM</sup> - The Easy Splice

PCA-1360

RopeWizer - El Empalme Fácil

$20.00 USD
/
Los gastos de envío se calculan en la pantalla de pagos.

FIND YOUR DEALER

TECHNICAL SPECIFICATIONS

¡TRABAJA DE FORMA MÁS SEGURA Y ALARGA LA VIDA DE TU CUERDA USANDO EL ROPEWIZERTM!

Los nudos estándar reducen la capacidad de la cuerda entre un 30 y un 50 %. La única forma de mantenerla casi al 100 % era que un profesional realizara un empalme.
¡Pero ya no! El RopeWizerTM es fácil de colocar en el extremo de tu cuerda y te brinda todos los beneficios de un empalme convencional, ¡sin el alto precio!

Origen: CANADÁ 🍁

Se recomienda utilizar con cuerdas de 3/8" (10 mm) de diámetro. Puede usarse con cuerdas de hasta 1/2" (12 mm) de diámetro.

El diámetro de apertura es de 5/8" (16 mm). 

La resistencia mínima a la rotura es (MBS): 25 kN (5620 lbs / 2549 kg)

**El RopeWizerTM debe usarse con un factor de seguridad mínimo de 2.**

Enlace para descargar el manual

También te puede interesar

  • 5 stars: 18 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
E
Eric Buller
RopeWizer

Great experience! Super fast fulfillment, and works exactly as promised

B
B. Retko
I Have Two RopeWizers

My first rope was a 1/2” x 164’ rope that came with my winch kit, however at that time the kit did not come with a RopeWizer. I put one on and I have found that it has made the terminal knot much more durable and the terminal end lasts a lot longer. Recently, I purchased a second RopeWizer for a new 328’ rope. I put up a lot of firewood in country with steep hills and ravines and rope durability is very important to me.

A
Alain Thibodeau
Tres pratique et simple à utiliser

Très utile dans le bois, pas besoin d'outil. En 5 minutes c'est fait

C
Craig Amnott
PCW 4000

Awesome! Easy assembly. Easy to use. Does what the company says it will do. Back and time saver. I use it to get downed trees out of the woods that are off the beaten path that I am unable to get to with my tractor and grapple. Bring them to the tractor and the rest is history. . .

E
E.O.
Clever idea

Gives a lot of confidence when using 10mm ropes on heavier loads

s
simon bertrand

Super

W
Winford Smith
Ropewizer

I have not had an opportunity to try this device out yet. That said, I was looking just type of item for several months before finding it at Portable Winch when I was ordering an additional single pulley block and several carabiners for my hunting kit. This deviocer will permit me to attach the bitter end of the block and tackle setup to a quad's hitch without damage to the 3/4" Portable Winch rope, and this should make it easier to move an adult moose than having people pull on the rope.

J
John Chadbourne
Great product

Brought the ropewizer for my 3/8rope worked great ,you won’t be disappointed

G
Gregory Doucette
Security

No worries of s disconnect when pulling logs

M
MICHEL LANGLOIS
Super ropewizer

J’ai acheté 2 ropewizer très satisfait facile à installer très robuste va prolonger la vie de ma corde

M
Mark Lewis
Ingenious & Super Handy

I used to keep a bowline loop tied onto one end of my ropes for my PCW-3000 and PCW-4000. I was intrigued by the videos about RopeWizer, so I ordered one for each rope. Very ingenious on three counts: the carabiner is not pulling on the rope directly (eliminates any possible friction; it takes less space than my former bowline loop, and it is a stronger setup (more wraps, no hard bends in the rope) so I get more pulling capacity out of the ropes. I am VERY glad I got these

R
Russell Wilkins
great new tool

Very ingenous device, works very well.

P
Pierre Larose
Very good

Easy to use and helpfull

P
Peter Jaworski
Jury's Still Out

I didn't notice any improvement in pulling power with the RopeWizer versus the hook and bowline knot. If anything it seemed like it put more stress on the rope during use. But no two pulls are exactly the same so it's hard to say if it was better or worse. I'm open to suggestions since I may be doing something wrong.

Good day Mr. Jaworski,

Thank you for taking the time to share your comments. Just to clarify the expectations towards the RopeWizer, I have to say that the accessory is not meant to add power; it improves the rope's capacity during the pull, preserving more of the rope's capacity than a bowline knot would. You will therefore feel no difference during the pulling operation. It is only at the rope's breaking point that the RopeWizer will do what it does. I hope this will be helpful and please don't hesitate to call our team if you have any questions!

P
P.J.
Can't Wait To Try It

The Ropewizer seems like a nice addition to the product line. I just purchased it and can't wait to try it out and compare its performance with the original bowline knot.

r
roger fortin
evaluation

Je ne les ai pas encore utiliser

g
grant bitten
Slick !

Seems like a great addition to the line! Easy to install, much easier than tying the double bowline ! Will for sure reduce stress on the rope ! Nice job !

P
Pierre Morel
Rope wizard

Best service by chat or telephone thanks for helping me

D
Don McCann

If for some reason I need to remove it, can the knot be easily undone, or do you need to cut it free?

Portable Winch USA

Good day Mr. McCann,
Once the RopeWizer has been used under load and tightened at the end of the rope, it cannot be untied and the rope end will need to be cut off.
Before cutting the rope, wrap electrical tape around the section where you plan to cut. Using a sharp knife, cut through the center of the taped section. Then carefully melt the freshly cut end to prevent the rope from fraying or unbraiding.
Thank you

M
MARK B

Hello! I see 1/2” (12mm) is the max size for the RopeWizer, but am curious if a 1/2” (13mm) 12 Strand - Hollow Braid rope would actually fit?
If not, would there be any issue using a 7/16” (11mm) 12 Strand - Hollow Braid rope?
Ingenious idea of a product and looking forward to getting out there with it!

Thanks!

Portable Winch USA

Hello!

Thank you very much for your great comment; I'll pass it on to the engineering team :)

In answer to your question, yes, the 13 mm will fit in the RopeWizer and the type of rope doesn't really matter.

Thanks again and please don't hesitate if you need any additional information!
Kind regards,
Portable Winch Team