PCT1800<br>Electric <BR>pulling/lifting winch
PCT1800<br>Electric <BR>pulling/lifting winch
PCT1800<br>Electric <BR>pulling/lifting winch
PCT1800<br>Electric <BR>pulling/lifting winch
PCT1800<br>Electric <BR>pulling/lifting winch
PCT1800<br>Electric <BR>pulling/lifting winch
PCT1800<br>Electric <BR>pulling/lifting winch
PCT1800<br>Electric <BR>pulling/lifting winch

pulling/lifting winch


Regular price$3,195.00 USD
Shipping calculated at checkout.



The Plug-In Winch
The PCT1800 is recommended for situations where a conventional combustion engine is unusable or where noise is a factor. This electric winch, designed for lifting and pulling, is ideal for works to be done indoors, for pulling wire through conduits for example, as well as outside, for hoisting various equipment.

As with all other Portable Winch models, the PCT1800 has a capstan drum that maintains the same force throughout the work, over an unlimited length of rope. Specifically developed for lifting winches, the rope Progressive Capture System (PCS) is found on the PCT1800 series. Once the rope is inserted into the grabbing system, the operator activates the winch and initiates the movement simply by pulling horizontally on the rope. At any time, the operator can decide to stop lifting and keep the load in suspension, without any problem. In order to lower a load, the operator must pull the grabbing system cord handle to disengage. Then, the operator will be able to control the main rope in its lowering movement. If ever the rope was to slip out of the operator's hands, the grabbing system would grip the rope and prevent the load from collapsing to the ground.

Powered by a 1 ph - 3/4 hp electric motor, the PCT1800 develops a pulling force of 1,805 lb and offers a lifting capacity of 550 lb in a single line. Of course, a block and tackle system will allow you to increase its capacities!

Two versions are available: 60Hz and 50Hz. Make sure you choose the correct version for your region.

PCT1800-60Hz (1) PCT1800-50Hz (2)
Series Industrial
Designed in 2009
Motor/Engine Baldor AC Electric TEFC - 115/230 VAC
1 ph - 60 Hz
0.56 kW - 0.75 HP @ 3,450 tr/min
Baldor AC Electric TEFC - 110/220 VAC
1 ph - 50 Hz
0,56 kW - 0,75 HP @ 2,850 tr/min
Powered by 115 V power supply 220 V power supply
Direct drive (no clutch)
Rope Retention System Progressive Capture System (PCS)
Drum turns when motor/engine is idling No idle on electric motors
Pulling Capacity
   Standard drum (single line / double line) Ø 3-3/8'' (85 mm): 1,805 lb / 3,610 lb
   Optional drum (single line / double line) Ø 2-1/4'' (57 mm): 2,200 lb / 4,400 lb
Lifting Capacity
   Standard drum (single line / double line) Ø 3-3/8'' (85 mm): 550 lb / 1,100 lb
   Optional drum (single line / double line) Ø 2-1/4'' (57 mm): 2550 lb / 1,100 lb
     Standard drum Ø 3-3/8'' (85 mm): 29'/min Ø 3-3/8'' (85 mm): 24'/min
     Optional drum Ø 2-1/4'' (57 mm): 19'/min Ø 2-1/4'' (57 mm): 16'/min
Weight 53 lb 60 lb
Dimensions (overall) 21-7/8'' x 14-3/8'' x 14-3/8''
Aluminium alloy. Heat treated 3-stage spur gears. Shafts mounted on ball bearings. Oil bath lubrication.
 Gear ratio 110:1
 Brake Anti-reversing roller clutch bearing
 Work cycle 25% (15 min/h to prevent motor overheating)
Rope (not included)
Low stretch double braided polyester
 Length Unlimited
    Minimum Breaking Strength (MBS)
7,275 lb
 Minimum diameter Ø 1/2'' (12 mm)
 Maximum diameter Ø 1/2'' (13 mm)
 Recommended diameter Ø 1/2'' (12 mm)
 For lifting Ø 1/2'' (12 mm) with eye splice and thimble
Polyester sling - 2-1/2'' x 6-1/2'
Warranty Once purchased, register your winch online and get 1 additional year of warranty for FREE!
 Private use 2 years
 Commercial use 1 year
 Motor/Engine Baldor (ABB) International Warranty

Nema Certification: IP54
Lifting Classification (ISO): M3

User Guide Download user guide