Build your kit

Welcome ! Based on your location and your browser preferences, we suggest the following regional preferences: English, United States


Applications : Industrial
2,395.00 €

You may ask a quote for more than one product. Click here

Manufacturer’s suggested retail price. Applicable taxes not included.
A great tool for pulling and lifting. It is equipped with a rope grabbing system which will hold a load in position allowing the operator to work safely. More details
775 kg 1710 lb
Rated Lift. Cap.
250 kg 550 lb
19 kg 42 lb
12 m/min 40'/min
Honda 4-stroke GXH-50 cc


The ideal tool for lifting a load!

The PCH1000 has been designed specifically for lifting applications on a work site such as assembling telecommunications structures or installing various equipment. It can lift a load of 250 kg with a single line and a pulley system doubles the strength to 500 kg.

Its integrated rope grabbing system (brake) will hold the load in position allowing the operator to work safely.

This system can be used to lift or lower a load. A wide of accessories are available to simplify the installation process and anchor the winch at various anchoring points such as a vehicle, a post, a pylon and more.

Find out more by downloading the user manual below.

*Note: One (1) anchor polyester sling 60 mm x 2 m is always included with every winch.


Maximum pulling force with installed drum (metric) : 775 kg
Maximum pulling force with installed drum (imperial) : 1710 lb
Maximum pulling force with optional drum (metric) : 540 kg
Maximum pulling force with optional drum (imperial) : 1190 lb
Rated lifting capacity with installed drum (metric) : 250 kg
Rated lifting capacity with installed drum (imperial) : 550 lb
Rated lifting capacity with optional drum (metric) : 175 kg
Rated lifting capacity with optional drum (imperial) : 385 lb
Capstan drums
Installed : 57 mm
Optional : 85 mm
57 mm drum : 12 m/min
57 mm drum : 40'/min
85 mm drum : 18 m/min
85 mm drum : 60'/min
Lifting : Low stretch double braided polyester - unlimited length - Eye splice and thimble mandatory for lifting applications
Minimum diameter (metric) : 12 mm
Minimum diameter (imperial) : 1/2"
Maximum diameter (metric) : 13 mm
Maximum diameter (imperial) : 1/2"
Ideal diameter (metric) : 12 mm
Ideal diameter (imperial) : 1/2"
Engine/Motor & Gear box
Engine/Motor : Honda 4-stroke GXH-50 cc
Gear box and gears : Aluminium alloy gear box. Heat treated 3 stage spur gears. Shafts mounted on ball bearings. Oil bath lubrication.
Gear ratio : 110:1
Brake : Anti-reversing needle bearing
Clutch : Centrifugal
Drum turns with engine idling : No
Work cycle : Continuous
Weight & Dimensions
Weight (metric) : 19 kg
Weight (imperial) : 42 lb
Length (metric) : 50,5 cm
Length (imperial) : 19-7/8''
Width (metric) : 37,1 cm
Width (imperial) : 14-5/8''
Height (metric) : 36,1 cm
Height (imperial) : 14-1/4''
Included : Polyester sling 60 mm x 2 m (PCA-1260)
Private use : 2 years
Commercial use : 1 year
Engine/Motor : Honda International Warranty
Certification : CE and M3 (ISO) Lifting
Additional information
Additional information : Register your winch at and get 1 EXTRA YEAR of warranty for FREE !



Previous testimonial

« I liked the fact that the winch is built in Canada. »

Martin Timmons, Upper Sackville, Nova Scotia, Canada

« Flexibility for multiple uses. »

Ken Rubesh, Portland, Oregon, USA

« Great product: pulled an elk one third of a mile with ease. »

Shawn Cles, Maple Valley, Washington, USA

« I have tried to use this winch, this is a good product, it makes me convenient on my work. »

Hau Edmond, Hong Kong

« I own a PCW5000 and wanted a lighter model for hunting. That is why I also bought the PCW3000! Very happy with your products. »

Kevin Cassidy, Durham, Maine, USA

« I purchased this because of a hunting experience and its portability. »

Jacques Monfette, Peace River, Alberta, Canada

« I needed a remote winch. Thanks. »

Edward Kilmartin, Twain Harte, California, USA

« Love my winch. Use it to pull poly docks out of the water. Just great! »

Tim Ruggerio , Hadley, New York, USA

« We have used the winch for a few weeks now and are very impressed with how it is able to pull out the wood for us. It is a great solution for a wood lot with no access for traditional equipment. »

Paul Begin, Victoria Harbour, Ontario, Canada

« Speed of 26’ per minute (8 m/min) was a key consideration, and not having to "reverse" feed the wire back out. »

Kenneth Hixson, Novi, Michigan, USA

Next testimonial