Build your kit

Welcome ! Based on your location and your browser preferences, we suggest the following regional preferences: English, United States

PYLON MOUNT WINCH ANCHORING SYSTEM PCA-1806

Anchor
Applications : Industrial
495.00 €

You may ask a quote for more than one product. Click here

Manufacturer’s suggested retail price. Applicable taxes not included.

The pylon mount anchor system is designed to fit different winch models directly to the main frame of a 90° V-shaped pylon.

More details
Weight
7.3 kg 16 lb
Material
Steel with high-resistance paint

Description

The pylon mount anchor system is designed to fit different winch models directly to the main frame of a 90° V-shaped pylon. It is the basis of different combinations of accessories. It is easily installed by one person thanks to the integrated magnets at the back of the support that keep it in place during the installation. Four reversible aluminum anchor hooks, with slots of three (3) different widths, hold onto most 10 cm to 30 cm steel angles - single or double thickness. These hooks are tight in place by hand. Thanks to the four-star handles, no tools are needed for installation.

It can not be used alone; it must be combined with different accessories to use it. Refer to the chart of anchorages for winches (pdf) at the bottom of this page to visualize the combinations of accessories that can be done with the PCA-1806.

Thus, it will be combined with the following accessories to allow horizontal pulling. In these cases, the winch will face the load and the rope will be in a direct line towards the winch.

    Fig.19      PCA-1806+ PCA-1268   
    Fig. 20      PCA-1806+ PCA-1332 + PCA-1264   
    Fig. 21      PCA-1806+ PCA-1332 + PCA-2264   

If combined with the following accessories, it will be used for vertical pulling. In these cases, the winch will face the anchor point and the rope will come from the top to the winch.

    Fig. 22      PCA-1806+ PCA-1264   
    Fig. 23      PCA-1806+ PCA-2264   

FOR WINCHES: PCW3000, PCW3000-Li, PCW5000, PCW5000-HS, PCH1000, PCH2000, PCT1800

 

 

Specifications

Specifications
Material : Steel with high-resistance paint
Weight & Dimensions
Weight (metric) : 7.3 kg
Weight (imperial) : 16 lb
Length (metric) : 46 cm
Length (imperial) : 18-1/8"
Width (metric) : 34 cm
Width (imperial) : 13-3/8"
Height (metric) : 26 cm
Height (imperial) : 10-1/4"
Warranty
Other : 1 year
Additional information
Additional Information : Features four (4) reversible aluminium hooks to provide grip on most steel angles from 10 cm to 30 cm (4'' to 11-13/16'')

Testimonials

Previous testimonial

« I liked the fact that the winch is built in Canada. »

Martin Timmons, Upper Sackville, Nova Scotia, Canada

« Flexibility for multiple uses. »

Ken Rubesh, Portland, Oregon, USA

« Great product: pulled an elk one third of a mile with ease. »

Shawn Cles, Maple Valley, Washington, USA

« I have tried to use this winch, this is a good product, it makes me convenient on my work. »

Hau Edmond, Hong Kong

« I own a PCW5000 and wanted a lighter model for hunting. That is why I also bought the PCW3000! Very happy with your products. »

Kevin Cassidy, Durham, Maine, USA

« I purchased this because of a hunting experience and its portability. »

Jacques Monfette, Peace River, Alberta, Canada

« I needed a remote winch. Thanks. »

Edward Kilmartin, Twain Harte, California, USA

« Love my winch. Use it to pull poly docks out of the water. Just great! »

Tim Ruggerio , Hadley, New York, USA

« We have used the winch for a few weeks now and are very impressed with how it is able to pull out the wood for us. It is a great solution for a wood lot with no access for traditional equipment. »

Paul Begin, Victoria Harbour, Ontario, Canada

« Speed of 26’ per minute (8 m/min) was a key consideration, and not having to "reverse" feed the wire back out. »

Kenneth Hixson, Novi, Michigan, USA

Next testimonial
X