In certain situations, the winch supports for vertical pulling PCA-1264 and PCA-2264 can also be used for horizontal pull. This pivoting anchorage then acts like the link between the vertical pull support and the anchoring systems listed here below. It ensures that the winch is always aligned with the load.
It can not be used alone; it must be combined with other accessories in order to be used. Refer to the chart of anchorages for winches (pdf) at the bottom of this page to visualize the combinations of accessories that can be done with the PCA-1332.
Thus, it will be combined with the following accessories to allow horizontal pulling. In such case, the winch will face the load and the rope will be in a direct line towards the winch.
| Fig. 4/5
|| PCA-1263 + PCA-1332 + PCA-1264 / PCA-2264
| Fig. 10/11
|| PCA-1267 / PCA-1501 + PCA-1332 + PCA-1264 / PCA-2264
|Fig. 15/16|| PCA-1266 + PCA-1332 + PCA-1264 / PCA-2264
|Fig. 20/21|| PCA-1806 + PCA-1332 + PCA-1264 / PCA-2264
FOR WINCHES: PCW3000, PCW3000-Li, PCW5000, PCW5000-HS, PCH1000, PCH2000, PCT1800