Build your kit

Welcome ! Based on your location and your browser preferences, we suggest the following regional preferences: English, United States

STAINLESS STEEL DOUBLE SWING SIDE SNATCH BLOCK. 2 ALU. SHEAVES 76 MM PCA-1283

Pulley
Applications : Forestry, Hunting, Industrial, Other
85.00 $

You may ask a quote for more than one product. Click here

Manufacturer’s suggested retail price. Applicable taxes not included.

This stainless steel double swing side snatch block features two lightweight 76 mm diameter deep groove aluminum sheaves.



More details
Diameter
76 mm 3''
Minimum breaking strength (MBS)
N/A N/A
Working load limit (WLL)
32 kN (3263 kg) 32 kN (7200 lb)
Weight
0,82 kg 1,8 lb

Description

This swing-side pulley opens to install rope and keep it from going out.

Its two 76 mm aluminum sheaves are mounted on a self-lubricating bronze bearing and provide an efficiency of 98%. The sides, the center plate and the shaft are made of stainless steel.

An excellent pulley, robust and durable. A hole at the bottom of the center plate allows to attach the end of the rope with a carabiner when needed.

Use 50kN carabiners (PCA-1702) or 70kN (PCA-1701) to attach the pulley to a polyester sling.

When using this pulley along with the single pulley PCA-1275, you can quadruple the pulling strength. With 2 of these double pulleys, 5 tons of pulling power will be generated when using the PCW3000-Li.

Ideal rope diameter : 10 mm

Specifications

Specifications
Minimum Breaking Strength (metric) : N/A
Minimum Breaking Strength (imperial) : N/A
Working Load Limit (metric) : 32 kN (3263 kg)
Working Load Limit (imperial) : 32 kN (7200 lb)
Certification : ---
Material : Sides: Stainless steel. Sheaves: Aluminum
Weight & Dimensions
Weight (metric) : 0,82 kg
Weight (imperial) : 1,8 lb
Diameter (metric) : 76 mm
Diameter (imperial) : 3''
Length (metric) : 18,34 cm
Length (imperial) : 7,22"
Width (metric) : 7,95 cm
Width (imperial) : 3,13"
Height (metric) : 4,88 cm
Height (imperial) : 1,92"
Rope
Minimum diameter (metric) : 6 mm
Minimum diameter (imperial) : 1/4"
Maximum diameter (metric) : 10 mm
Maximum diameter (imperial) : 3/8''
Warranty
Other : 1 year
Additional information
Additional Information : Not designed for steel cable.
Additional information : The NEWTON is the International System unit for force; it is equal to the amount of net force required to accelerate a mass of one kilogram at a rate of one meter per second squared. --- The WORKING LOAD LIMIT (WLL) is the maximum load which should not be exceeded under any condition. --- The MINIMUM BREAKING STRENGTH (MBS) is observed during a destructive test. You should divide it by an appropriate safety factor.

Testimonials

Previous testimonial

« I liked the fact that the winch is built in Canada. »

Martin Timmons, Upper Sackville, Nova Scotia, Canada

« Flexibility for multiple uses. »

Ken Rubesh, Portland, Oregon, USA

« Great product: pulled an elk one third of a mile with ease. »

Shawn Cles, Maple Valley, Washington, USA

« I have tried to use this winch, this is a good product, it makes me convenient on my work. »

Hau Edmond, Hong Kong

« I own a PCW5000 and wanted a lighter model for hunting. That is why I also bought the PCW3000! Very happy with your products. »

Kevin Cassidy, Durham, Maine, USA

« I purchased this because of a hunting experience and its portability. »

Jacques Monfette, Peace River, Alberta, Canada

« I needed a remote winch. Thanks. »

Edward Kilmartin, Twain Harte, California, USA

« Love my winch. Use it to pull poly docks out of the water. Just great! »

Tim Ruggerio , Hadley, New York, USA

« We have used the winch for a few weeks now and are very impressed with how it is able to pull out the wood for us. It is a great solution for a wood lot with no access for traditional equipment. »

Paul Begin, Victoria Harbour, Ontario, Canada

« Speed of 26’ per minute (8 m/min) was a key consideration, and not having to "reverse" feed the wire back out. »

Kenneth Hixson, Novi, Michigan, USA

Next testimonial
X